What are the ways to clean the duct production line? What are the specific process steps? The following professional duct production line manufacturers Comifo for everyone to explain the specific process of cleaning duct production process steps, I hope to give you some suggestions.
Duct production line in the production operations will produce stains, dust and debris, in order not to affect the progress of the work, the duct production line
to timely clean-up to ensure the effective work. The cleaning of the duct production line is generally carried out by three methods: power scrubbing, gas flushing and vacuum suction.
1. Power scrubbing method: This method is mainly with a pneumatic or electric brush to dirty brush, and then stains and gas flushing the same method and direction was sucked into the vacuum collector. In this way, be careful not to damage the surface of the insulation material.
2. Gas Flushing Method: This method conveys compressed air by means of a hose with a nozzle connected to the duct. The principle of flushing is to design the nozzle so that the compressed air can expel dust and dirt. And the compressed air to dry the dirt and dust are transported along the duct into the vacuum container.
3. Vacuum suction method: similar to a hand-held vacuum suction pipe to operate. Use a brush to directly contact the inner wall of the pipe to remove dirt. This method is very simple, only the air duct has a larger maintenance hole so that the operation of the staff can get as much as possible on the line. But this method is most likely to miss a portion of the dust and dirt, because the duct production line duct can not form a complete negative pressure conditions.