The maintenance of the air duct production line
is what all customers should pay attention to. Only by strengthening the maintenance of the air duct production line, can the machine operate and operate normally, ensure that the daily work of the air duct production line does not break down and stop, and ensure the daily high work efficiency and quality. Next, for you to introduce a few duct production line maintenance tips.
1. Cleaning of air duct production line
In the long-term work process of the air duct production line, a lot of materials and sundries will be left, so the air duct production line needs to be cleaned and maintained in time to avoid problems. Here are three cleaning methods for air duct production line:
(1) Gas flushing
&Nbsp; the hose with nozzle connected to the air duct can deliver compressed air to drive dust and dirt from the air duct to the vacuum collecting container, so as to remove dust and sundries.
(2) Vacuum suction
&Nbsp; this method requires a cleaning tool, called vacuum suction. The vacuum suction pipe adopts the hand-held type, and the brush can directly contact the inner wall of the pipe so as to achieve the purpose of cleaning the dirt in the pipe. But there is a requirement to adopt this method, that is, the manhole of air duct must be large enough. In addition, because the air duct can not form enough negative pressure conditions, it is likely that this cleaning method will leak some stains.
(3) Power wash
&The power of this way comes from pneumatic or electric. Under the action of pneumatic or electric power, the brush moves the dirt in the air duct, and then the dirt is transported to the vacuum collector by the way of gas washing. In this way, it should be noted that the surface of the insulation material is damaged during the cleaning process.
The air duct production line should also pay attention to the daily maintenance of the machine in daily use. The following points should be noted:
(1) Check the working condition of the air duct production line frequently, correct the problems found in time, and forbid the machine to run with faults to prevent the occurrence of safety accidents.
(2) Keep the appearance of air duct production line clean at all times. When it is not used for a long time, the surface shall be coated with anti rust grease.
(3) The operator shall operate correctly according to the specification, and understand and master the performance and operation method of the machine. It is strictly forbidden to operate by non professionals.
3. Regular maintenance of air duct production line
(1) Regularly add proper amount of lubricating oil to the driving teeth of the air duct production line, which can greatly reduce the wear degree of the machine in operation.
(2) Generally, the maintenance period of the air duct production line is half a year, and the machine and equipment are disassembled regularly for inspection and maintenance.