Stainless steel spiral duct machine is a kind of spiral duct machine, which is widely used at present. It can be seen in chemical fiber, petrochemical, machinery manufacturing, medicine, food and other industries. Also, because it can be used in various situations, it is a good spiral pipe, briefly introduce the pipe, get a basic understanding.
Both ends of the stainless steel spiral duct machine are normally external accessories such as elbows, and there are also sealing rings at both ends, but no grooves. The main features of the stainless steel screw machine are beautiful appearance, high strength, good sealing performance, simple installation and long life.
The inner and outer walls of the stainless steel spiral duct machine are smooth, the piping resistance is small, and no noise is generated during use. Basically no maintenance is required, which can reduce power consumption and save costs. The installation of the stainless steel coil is also very important, the main content is the stainless steel coil tube, installed horizontally, the diameter or length of the long side should not exceed 400mm, the distance should not exceed 4 meters, the diameter or length of the long side should not exceed 400mm, and the distance should not exceed 3 meters.
The distance between the bracket and the hanger of the stainless steel spiral duct machine is 5 meters, and the length is 3.75 meters. Pipe supports and hangers shall not be placed on air vents, valves, check valves, etc.
1. Low installation cost
The installation time of stainless steel spiral duct machine is only one third of that of rectangular duct.
2. Usually only a small installation space is required.
Without adding additional installation space, the stainless steel spiral duct machine can replace the rectangular duct, and takes up less space than the rectangular duct.
The wind resistance of the stainless steel spiral duct machine is much smaller than that of the rectangular duct.
4. Precision bite forming process
The molds used in the stainless steel spiral duct machine are all made of special steel. Even after several years of use, the surface of the stamper remains unchanged, and the surface of the galvanized steel sheet will not be damaged. At the same time, the seam is flat, the bite is tight, the connection is firm, and the sealing performance is good.
5. The leak-proof system of the safety sealing ring adopts the spiral pressure rib technology.
The stainless steel spiral duct machine process can make the spiral pipe bear greater pressure, and the thickness of the undercut joint is four times that of the pipe body, which increases the rigidity and superiority of the pipeline. Not damaged and deformed. In addition, the material thickness can be reduced by 15%, reducing the cost.
6. Less thermal insulation material
Due to the length of the stainless steel spiral duct machine, the insulation material can be reduced accordingly.
We provide customers with quality products and provide high-quality services
If you would like to leave us a comment please go to