The Working Principle Of Plate Shearing Machine
- source: gzcomifo;
- Time: 09/08/2020
- Clicks: 215
The shearing machine is mainly used to cut the straight edge of metal plates of various scales. It is widely used in steel rolling, cars, airplanes, boats, tractors, bridges, electrical appliances, instruments, boilers and other industrial sectors.
Working principle of shearing trigger working principle of shearing machine the blade is fixed on the upper and lower blade of the tool holder, fixed on the bed surface of the lower bed, and equipped with a supporting ball to facilitate the feeding and moving of the sheet material, and the back baffle plate is used for the positioning position of the sheet material, which is adjusted by the positioning pin. The hydraulic pressing barrel is used to press the sheet metal to avoid the sheet metal overturning during shearing. The shed board is a safety device to avoid industrial accidents.
1. Adjust the back baffle plate to make the template flat and align with the lower blade, then close the back baffle plate to the template and fix it to remove the template, and then install the plate for cutting.
2. Adjust the front baffle plate of the shearing machine to make the rear baffle plate close to the lower blade, and then close the sample plate to the rear baffle plate to make the front baffle plate close to the sample plate and fix it. Loosen the back baffle plate, remove the sample plate and install the plate for cutting.
3. To adjust the angle baffle, first place the template on the table, align the lower blade, adjust the angle baffle and fix it, then use the angle baffle and the back baffle together to locate during the shearing process of the back baffle according to the template adjustment.